Prosthetics Dentistry II Practice Test

These questions are part of the practice quiz. Start practicing

• What is the recommended clearance on the nonfunctional cusp after occlusal reduction?
• What is a contraindication for metal ceramic crowns?
• Why is it challenging to achieve accurate occlusal harmony with porcelain inlays?
• Which procedure is critical for practitioners to prevent irreversible mistakes in restorative dentistry?
• What is the main advantage of using a polyether impression material?
• The completed reduction of the incisal edge on an anterior tooth should allow for adequate material thickness to permit translucency in the completed restoration. What is the required thickness?
• Which of the following is NOT a factor to consider for facilitating impression making?
• When additional retention and resistance is needed in a dental restoration, which margin location is required?
• What is the primary reason for using a provisional restoration?
• What is the standard width of noncentric cusps?
• What is a key factor in the design of a dental crown?
• An interim fixed restoration should establish or maintain proper contacts with which of the following?
• Which one of the following is an intracoronal cast metal restoration?
• A custom external surface form (ESF) is a reproduction of what?
• During preparation, the mouth mirror can be used to protect which area?
• To facilitate plaque removal, what must an interim fixed restoration have?
• Which characteristic can facilitate plaque removal in interim fixed restorations?
• What is required when placing a cord for gingival retraction?
• The properly contoured interim restoration should be smoothly continuous with what part of the tooth?
• What generates considerable heat during tooth preparation?
• What are the types of external surface forms?
• What reduces marginal leakage associated with polymerization shrinkage in restorations?
• What is the recommended convergence angle of preparation for opposing walls?
• What was developed to maintain the intra-sulcular position of the cord?
• Why is the cross-sectional configuration of a margin important?
• Which instrument is used for creating the margin in veneer preparation?
• What effect does clonidine, an antihypertensive drug, have on salivary output?
• What type of material improves the accuracy of an impression by having a low surface area/volume ratio?
• What margin location is important for aesthetic considerations to minimize the visibility of metal?
• What is a common attribute of addition silicone materials?
• Which type of teeth requires more parallel preparation?
• What does the term "occlusal clearance" refer to in dentistry?
• What is the purpose of the functional cusp bevel in dental preparations?
• Which of the following materials is most likely to require immediate pouring to prevent dimensional changes?
• Why do centric and noncentric cusps differ in thickness?
• What is the primary use of an excavator during MOD preparation?
• What is an indication for using cast gold inlays?
• What is a common error during the preparation of a partial coverage restoration regarding the path of placement?
• What is the depth of the centric cusps of a partial veneer?
• What should be done to ensure proper retention of a restoration?
• In the context of occlusal adjustments, what is a primary function of the functional cusp?
• What is the primary reason to maintain dentin structure in proximal areas when fabricating posts?
• What is a disadvantage of complete cast crowns compared to other restorative options?
• What characteristic of bonded restorations contributes to their stability in function?
• What is the recommended thickness for a custom tray?
• During preparation for a metal-ceramic crown, which tooth type is most likely to expose the pulp?
• The use of guiding grooves for occlusal reduction is beneficial primarily when?
• What margin design is preferred for all-ceramic crowns?
• What material typically restores the proximal surfaces of anterior metal-ceramic crowns?
• What is the significance of root canal cross-section in post selection?
• Where does the parotid duct open?
• Which impression material should be poured as soon as possible after impression making?
• How does reduced bulk affect elastomeric impression materials?
• Which impression material requires a separate adhesive for tray application?
• What is a primary advantage of partial veneer restorations?
• Interim restoration enamel fracture is most predictable due to:
• A custom ESF can be produced from which of the following materials?
• Which factor impacts the longevity of a prosthetic restoration the most?
• What is the minimal preparation wall height recommended for anterior teeth?
• When might a clinician choose to use a partial veneer crown over a complete crown?
• What purpose do small grooves serve during post preparation in the canal wall?
• To support a partial removable dental prosthesis, which restoration is most appropriate?
• The chamfer must be smooth and continuous, and when evaluated, a distinct resistance to what should be felt?
• How should grooves for a molar seven-eighths crown be oriented?
• Which restoration is typically selected when correction of axial contours cannot be achieved conservatively?
• All ceramic crown preparations typically require which type of margin?
• What is the main aspect to adjust during the preparation of ledges?
• Tissue displacement during preparation is necessary to expose which type of surfaces?
• How is wedging retention affected if the inlay is not sufficiently wide mesiodistally?
• What is the relationship between the depth of guiding grooves and the final reduced width?
• What type of impression material is preferably used for capturing high-detail impressions for crowns?
• The goal of a dental restoration is to restore what?
• Inadequate contacts of interim restorations allow for which types of movement?
• What is the correct specification for the facial gingival margin in metal ceramic crowns?
• Which type of restoration is unsuitable for areas adjacent to a class II amalgam restoration?
• What is the main use of cement consistency in prosthetic dentistry?
• Which facial margin is recommended for a functional cusp on a mandibular molar partial coverage crown?
• Which material is recognized for providing better retention in post and core applications?
• In terms of dental anatomy, what does the term 'supragingival' refer to?
• What is the optimal margin width configured for all-ceramic restorations?
• What is the influence of dentin preservation during post fabrication?
• Which material has greater thermal expansion than polysulfide?
• At elevated temperatures, which type of impression material changes from a gel to a sol?
• What is the importance of cervical grooves in dental restorations?
• Pulpal damage under restoration can be caused primarily by?
• Why is it better to have undercontoured restoration than overcontoured?
• What is a key difference between porcelain and metal inlays?
• What is the primary focus of the tissue surface form (TSF) in prosthetics dentistry?
• Which of the following is NOT a contraindication for partial veneer crowns?
• Which margin design is most suitable to allow room for porcelain?
• What term describes the compatibility of different materials in a restoration?
• What factor is crucial when considering esthetics in all-ceramic restorations?
• What is the main purpose of a dental surveyor?
• Why is appropriate tooth structure removal important during preparation?
• For interproximal margins, it is critical that they:
• What is the primary reason for performing diagnostic tooth preparation?
• Which material is known for having the most pleasing aesthetic restorations?
• What is considered the most conservative margin design?
• Which of the following is NOT a type of saliva evacuator?
• Which method is often recommended to improve the retention of indirect restorations?
• Which of the following is NOT a biologic consideration in restorative dentistry?
• On which surface of the preparation is the cord typically placed?
• The taper of preparation is disproportional to which factor?
• Which restoration option has the highest risk of fracturing the tooth?
• For which purpose is a complete cast crown not typically used?
• To maintain periodontal health, where should restorations not be overcontoured?
• Upon completion of occlusal reduction, what clearance should exist on the functional cusp?
• What aspect is crucial for the long-term success of all-ceramic restorations?
• What should be prioritized to ensure adequate staging in partial veneer crowns?
• Which of the following is a vital biologic consideration related to tooth structure conservation?
• Which condition is a contraindication for using an all-ceramic inlay?
• What material is less rigid than polyether but stiffer than polysulfide?
• What type of impression material has a low surface area/volume ratio, enhancing accuracy?
• What is a potential risk when performing tooth preparation?
• What is an inappropriate characteristic of the gingival margin for metal ceramic restorations?
• What is one of the primary reasons to ensure a post's diameter is restricted to no more than one-third of the root diameter?
• What is a significant disadvantage of metal-ceramic crowns?
• What characteristic is typical of polyether impression materials?
• What is the next step if the impression material separates from the tray?
• What is the primary benefit of laminate veneers in esthetic dentistry?
• What is the first step in the preparation process for restorative dentistry?
• If there is planned mutually protected occlusion, what decision should be taken by the practitioner?
• What is the effect of gingival displacement with cord?
• What is an advantage of using addition silicone over other impression materials?
• One advantage of using polysulfide for impressions is its:
• What type of restoration is primarily used for aesthetic corrections in anterior teeth?
• Which restorative materials are suitable for cast crowns?
• Why is maintaining a lip of enamel important during preparation?
• Why might a dentist choose to use an all-ceramic material for a restoration?
• In a healthy tooth, where is the nucleus of the odontoblast located?
• What is the primary purpose of a core in prosthetic dentistry?
• Which of the following is an aspect of the chewing process improved by restorations?
• Which type of restoration cannot be performed on posterior teeth?
• When making adjustments to an interim restoration, which aspect is primarily considered?
• Which surface cannot be seen without the aid of a dental mirror?
• The margins of the intracoronal restoration should not be too close to a centric contact. What is the minimum distance recommended?
• When should root canal retreatment be considered?
• What is the main purpose of achieving proper taper in tooth preparation?
• What is a disadvantage of required adequate porcelain thickness for metal porcelain restoration?
• Which impression material is typically used for fabricating custom trays?
• In interim restorations, how should the size of connectors be adjusted to reduce the risk of failure?
• Which part of the tooth should be prioritized during ledge preparation to ensure uniformity?
• Overcontouring of a restoration is most likely to result from which margin design?
• What is a requirement of an interim fixed restoration?
• What is the main purpose of using a custom impression tray?
• Dimensional stability of condensation silicone is less than that of which material?
• What is required for optimal health when considering restorations?
• What do axial grooves determine in tooth preparation?
• What characteristic is essential for achieving a proper finish line in preparation?
• What distinguishes functional cusp reduction from nonfunctional cusp reduction for PFM?
• What happens when excessive occlusal clearance occurs?
• What is one reason why a certain degree of pulp trauma occurs during tooth preparation?
• How is the facial margin of an anterior restoration often placed to achieve better esthetics?
• In terms of aesthetics, which margin design is preferred?
• What is a disadvantage of silicone impression materials?
• Why is polysulfide commonly used in impression making?
• Why is it essential to control the orientation of the rotary instrument during dental procedures?
• Which of the following factors is crucial for the longevity of a dental restoration?
• Which type of restoration is best reserved for teeth with extensive structural loss?
• What should a clinician consider when designing margins for a crown?
• What is considered an advantage of partial veneer crowns?
• What should be primarily considered when designing the margin width of a restoration?
• What is a key factor in achieving the proper contour of interim restorations?
• Which plane is used to determine the path of placement for a veneer?
• During tooth preparation, which structure is least likely to be damaged?
• MOD inlays are characterized by which of the following?
• What characteristic is most associated with addition silicone impressions?
• What factor is directly proportional to the preparation diameter in prosthetics dentistry?
• When using a high-speed handpiece for tooth material removal, how should the pressure be applied?
• What is the primary subject of assessment for impression quality?
• What is a notable disadvantage of cast gold inlays?
• Why is it important to consider the compatibility of impression materials with gypsum?
• Which is an advantage of supragingival margins?
• What is the expected behavior of polysulfide polymer under specific temperature conditions?
• What margin design is recommended for laminate veneers?
• When should the replacement cord be removed from the sulci?
• What term refers to the surface form in contact with the edentulous ridge area?
• What does a metal ceramic restoration consist of?
• What is a common indication for using metal inlays over porcelain inlays?
• What are the advantages of polysulfide polymer in impression making?
• To allow muscle attachments, the border of the tray should be?
• What type of silicone is known for its ability to work well in moist environments for impressions?
• What is a characteristic of braided cord in dental procedures?
• What is an indication for using partial veneer crowns?
• Which type of bur is preferred for initial tooth preparation?
• Where should the mesial proximal margin for partial coverage restorations be placed?
• To improve the labial surface appearance for a PFM crown, what is done?
• Which of the following is a disadvantage of using irreversible hydrocolloid?
• In metal ceramic restorations, what is the primary reason for reducing the facial surface?
• What is a result of overcontouring in restorative dentistry?
• Which restoration approach minimizes tooth structure removal while still providing adequate support?
• What is the main aim of evaluating stress distribution in post placement?
• What type of bur is used for preparing a shoulder margin?
• What factor influences the aesthetics of partial veneer crowns?
• In prosthetic dentistry, which material is commonly used for final impressions due to its excellent detail reproduction?
• Which margin forms a 90-degree angle with the unprepared tooth surface?
• Which of the following statements is true regarding the reduction of occlusal surfaces?
• What is a common cause of injury during tooth preparation?
• What can cause over contoured restoration?
• Which margin location is primarily responsible for biological considerations in dentistry?
• Which of the following options is not a type of partial veneer crown?
• Which technique is deemed more effective for displacement during impression making?
• Which property is crucial for the success of elastomeric impressions?
• Which surfaces are covered by a mesio-occlusal inlay?
• Why are long posts with a circular cross-section not recommended for posterior teeth?
• What is a common advantage of using a partial veneer crown compared to a complete cast crown?
• Which preparation technique is essential for minimizing damage to pulp tissue?
• What is the function of the cervical plane diameter in tooth preparation?
• Why is the height of the coronal tooth structure for post preparation reduced proportionally to the remaining wall thickness?
• Which type of impression material is known for its dimensional stability?
• What is the purpose of hatches in preparation for restorations?
• Which type of impression material has steepness as a disadvantage?
• What is a difficulty associated with adjusting all ceramic restorations?
• What factor most affects the working time of polysulfide impression materials?
• Which restoration type might be the most effective in achieving color improvement in teeth?
• What is the purpose of preparing a lingual concavity in anterior teeth?
• What is a consequence of inadequate cuspal coverage?
• Why is a short crown considered as a contraindication for partial coverage restoration?
• To fabricate a partial veneer as a retainer for a long span FDP is considered?
• Teeth in the contact area are typically wider than at the cementoenamel junction by how much?
• In order to facilitate impression making, which factor is considered incorrect?
• What should the size of a post and core be in relation to the canal?
• In what context is an indirect impression making technique most commonly utilized?
• What consequence may arise from using sharp line angles in restorations?
• When evaluating occlusal centric contacts in completed restorations, what should be assessed?
• Which location of margin is least visible?
• What is the recommended height of intact tooth structure between the top of initial cord and preparation margin?
• The shoulder margin is mainly used to:
• What condition increases the heat generated during preparation?
• What is a significant consequence of tall, thin walls when preparing for a dental casting?
• What is a contraindication for cast gold inlays?
• Which surface of a crown typically has the lowest significance in total retention?
• What is a common reason for a post to cause a root fracture?
• What is the primary reason to choose a partial coverage restoration?
• Why is flaring not necessary for the buccal groove?
• How can excessive forces on partial FDP interim restoration connectors be reduced?
• What design of tooth preparation is recommended to prevent dislodging of restoration?
• In restorative dentistry, what is emphasized to ensure optimal mechanical properties of restorations?
• What type of restoration is often used to enhance the appearance of teeth while minimally altering their structure?
• What type of rotary instrument grit is recommended for final steps of restoration?
• What is a contraindication for using a complete ceramic crown?
• What margin location is recommended for achieving high aesthetic results in metal-ceramic restorations?
• When placing guiding grooves, what should the clinician concentrate on?
• At which tooth type can a functional cusp bevel be effectively performed?
• What is the standard width of a chamfer margin?
• What is the advantage of metal ceramic crowns?
• Which of the following is NOT an issue caused by incorrect preparation?
• How is a partial coverage restoration best described?
• In which bite registration position is occlusal clearance measured?
• What type of crown preparation allows for optimal esthetic results while still preserving tooth structure?
• Which type of bur is typically used to prepare a chamfer margin?
• What is an advantage of using reversible hydrocolloid for impressions?
• What is the recommended depth for the inlay occlusal outline prepared with a tapered carbide bur?
• Which instrument is typically used for lingual reduction during veneer preparation?
• What is one advantage of using plastic filling materials in dental restoration?
• Which material is known for high dimensional stability, allowing for accurate casts when poured after a delay?
• What factor primarily affects the retention of a dental crown?
• When assessing the adjustment of interim restoration, which occlusal aspect is critical?
• What is a potential implication of missing proximal contacts on interim restorations?
• What type of forces are considered substantial during tooth restoration procedures?
• Which situation is an indication for metal ceramic crowns?
• Which requirement is NOT typically satisfied by an optimal restoration?
• What leads to increased strength in interim restorative work?
• What is the width of margin for the complete cast crown?
• How should post length be calculated according to the anatomical crown height?
• What is the depth of occlusal guiding grooves in metal-ceramic restoration typically?
• Partial restorations should be designed to completely encircle the tooth to enhance?
• What is the ideal working and setting time for impression materials used in fixed prosthodontics?
• What is the recommended occlusal clearance for all-ceramic restoration in molar cusps?
• What is the primary distinction between a one-piece post and a two-piece core?
• What is a key purpose of a dental surveyor?
• What is a significant advantage of using partial-coverage restorations?
• Which material is most effective for enhanced impression making in sulcular areas and pinholes?
• Why is marginal leakage associated with polymerization shrinkage and a high thermal coefficient of expansion reduced?
• Which condition might indicate that a dental restoration is failing?
• Why is it important to check centric contacts before tooth preparation?
• Which preparation design is best known for providing a stronger resistance to dislodgment?
• What must be minimized to prevent pulpal damage during restorative procedures?
• What defines external surface forms in dentistry?
• What is the minimum clearance required between tooth preparation and adjacent tooth for inlays and onlays?
• What is the primary factor impacting retention in posterior tooth restorations?
• What is the purpose of a chamfer margin in restorative dentistry?
• Which type of restoration is not effective as a retainer for a fixed dental prosthesis (FDP)?
• What should the final configuration of a chamfer be?
• When using a rubber dam during a procedure, what is the main purpose?
• What consequence can result from a poorly finished margin in dental restorations?
• Which margin design is least likely to be supported during restoration preparation?
• Which method is considered conservative for restoring the appearance of discolored, pitted, or fractured anterior teeth?
• What is an advantage of displacement paste in dental practice?
• What is a common contraindication for choosing metal-ceramic restoration?
• On mandibular molars, which cusp is considered a functional cusp?
• Which material is known for being low in corrosion?
• Which property is most valued in impression materials for accuracy?
• Which restoration is indicated for an endodontically treated tooth with adequate supporting structure?
• What is the purpose of an othelentulospiral?
• Where should occlusal load be distributed in an all-ceramic restoration?
• All the following are considered esthetic restorations except for which?
• What type of restoration is preferred for discolored teeth?
• What is the primary indication for cast metal interim restoration?
• What is the importance of rounded surfaces preparation of a veneer?
• For molar teeth, the minimal preparation wall height should ideally be in which range?
• What is the primary purpose of using a metal matrix during tooth preparation?
• What concept explains why the grains of cement prevent two surfaces from sliding?
• With very thin teeth, what is a potential consequence of preparation?
• What is the primary purpose of the ferrule in dental prosthetics?
• During functional veneer crown preparation, what should the occlusal clearance be on the functional cusp?
• A limited path of placement can be provided by which of the following?
• What is the purpose of performing grooves during preparation?
• Why is sufficient reduction of the facial surface necessary when making metal ceramic restorations?
• Which biologic consideration relates to avoiding an excess in contouring of the restoration?
• What do resistance areas prevent in the context of dental restoration?
• What characteristic does a positive reproduction refer to?
• Why can high stress be generated during insertion with smooth, parallel-sided posts?
• Which factor is NOT considered before restoration?
• Which characteristic is important for a successful impression in prosthetics dentistry?
• What is an advantage of all ceramic restorations?
• How can tooth drifting be prevented after endodontics when a definitive restoration is delayed?
• Which tool is typically used for finishing a tooth preparation?
• What is the purpose of diagnostic waxing procedures?
• Which type of restoration does not penetrate the dentin layer?
• Tissue displacement is needed to expose which surfaces?
• Which material provides better retention for post and core restorations?
• What factors determine the exact amount of tooth reduction needed for metal-ceramic preparations?
• What factor should be prioritized when considering the reduction of functional cusps in a PFM crown?
• Which of the following principles of aesthetic consideration is not typically adhered to?
• What is the recommended reduction depth for a veneer?
• What is the proximal view of a mandibular central incisor typically described as?
• What is a primary objective of impression making in dental procedures?
• What can be a consequence of overpacking cord during dental procedures?
• A custom ESF is described as which type of reproduction?
• Which restoration is primarily designed to provide maximum strength and aesthetics for severely worn down teeth?
• What is an advantage of partial veneer crowns?
• What is the main indication for using a cast metal crown?
• What is the recommended width of a chamfer margin for a cast crown?
• What materials are typically used to construct preformed ESFs?
• Which of the following practices does NOT align with the conservation and preservation of tooth structure?
• Which type of restoration is not effective as a retainer for fixed dental prostheses (FDP)?
• Which type of alloy is NOT suitable for casting in restorative dentistry?
• Which property of a luting agent can influence the retention of a dental restoration?
• Which factor can contribute to poor occlusal form and subsequent occlusal dysfunction?
• What is the recommended incisal reduction for a porcelain fused to metal (PFM) crown?
• What is the purpose of using a football-shaped bur in dentistry?
• What is crucial about the junction between a tooth and its restoration?
• Which of the following is NOT a factor to consider when planning a crown?
• What is a typical characteristic of porcelain inlays compared to metal inlays?
• Which restoration type requires more tandem restorations for optimal function in patients with high caries index?
• During partial veneer crown preparation, what is the purpose of the flaring technique?
• Occlusal clearance is essential in ensuring what aspect of restorative work?
• What is the impact of using inappropriate occlusal arrangements in restorations?
• When preparing a chamfer, what concern must be taken into account?
• Which material is generally preferred for creating a shoulder-bevel margin?
• What characteristic must occlusal reduction possess for sufficient strength in partial coverage?
• When assessing a prepared tooth for a crown, what is essential?
• What is the primary characteristic of porcelain-fused-to-metal (PFM) restorations?
• For effective plaque removal, what characteristic should the surface of an interim fixed restoration possess?
• What is the required distance between occlusal contact and enamel restoration junction?
• Diagnostic tooth preparations are typically performed on what before actual clinical preparation?
• The preparation diameter is directly proportional to which factor?
• How is a heavy-bodied tray material typically used during impression procedures?
• In prosthodontics, what property is crucial for impression materials to have for accurate oral cavity representation?
• Which type of post is NOT commonly recognized?
• Which of the following is a type of flange-type evacuator?
• What is a common reason for failure of partial FDP interim restorations?
• What is the usual depth for pinholes during a pinledge preparation?
• Which margin design is known to potentially cause deformation of the restoration?
• When creating a proximal box for a Class II inlay, how should the bur be positioned?
• Which impression material is preferred for high precision in prosthetic applications due to low elastic recovery?
• What can result from insufficient functional beveling during crown preparation?
• Ceramic inlays and onlays are typically cemented on the tooth with which type of cement?
• Which impression material is suitable for patients with allergies to certain latex products?
• Why are partial coverage interim restorations weaker against occlusal forces?
• Nerve impulses from the periodontal ligament are involved in regulating what function?
• Which material is known for its superior wear resistance in dental restorations?
• What is a consideration when using a complete ceramic crown in patients with bruxism?
• What is usually the recommended position for the distal margin of partial coverage restorations?
• When treating small caries, inlays are typically considered:
• What is the recommended incisal reduction for a full crown preparation?
• What indicates sufficient cord placement?
• What can cause porosity in cast posts?
• What design should the gingival margin have on the proximal and lingual sides of a metal ceramic crown?
• What should be avoided during the preparation of a molar for an onlay to ensure effective adhesion?
• In what scenario is a less conservative ceramic restoration typically preferred?
• What is the clinical use of pinledges?
• What is a key consideration when selecting materials for dental prosthetics?
• After removing caries from a tooth preparation, what is the recommended action?
• Veneer reduction should ideally:
• Theoretically, maximum retention is obtained if a tooth preparation has what type of walls?
• Which of the following best describes the purpose of cervical grooves in preparation for dental restorations?
• What is the ideal margin placement for achieving proper fit and aesthetics?
• Which margin configuration is preferred for cast metal restorations?
• Why may a partial-coverage restoration have less resistance than a complete crown?
• Where is the palatal posterior border of the tray located?
• How does proper wall convergence affect the dental restoration process?
• In functional restoration design, which aspect is least related to esthetic improvements?
• What does conservation of tooth structure emphasize in dental restoration?
• What advantage does a subgingival margin have compared to a supragingival margin?
• In which dimension are tooth roots generally narrower?
• What is a disadvantage of cast gold inlays?
• Parallel-sided posts generate stress primarily on which area?
• What is the key difference between a one-piece post and a two-piece core restoration?
• Why is tray rigidity important for impression making?
• What is the primary function of a crown?
• When the jaws are moved apart after biting on very sticky food, what is the direction of the forces applied?
• What feature is essential for facilitating plaque removal in an interim fixed restoration?
• Compared to other types of crowns, the metal-ceramic crown is more durable than which of the following?
• Which material can be used to make custom trays?
• What is the primary purpose of laminate veneers in prosthetic dentistry?
• What is a primary use of anticholinergics in dental practice?
• Difficulties during fabrication of wax patterns or casting may be caused by which of the following?
• What is a primary goal when preparing a tooth for a fixed partial denture?
• What is the primary concern when preparing for a metal-ceramic crown regarding tooth structure?
• What is the recommended occlusal clearance for functional and nonfunctional cusps?
• What can lead to inadequate occlusal contacts on a tooth?
• Why are peeso-reamers and Gates-Glidden instruments considered "safe-trip" instruments?
• Which impression material is often recommended for patients with severe gag reflex during procedures?
• On maxillary molars, which cusp is considered a functional cusp?
• What is recommended to achieve adequate post canal space?
• When preparing a metal ceramic crown, which margin design is generally not used on anterior teeth?
• What is the advantage of ceramic inlays and onlays compared to gold restorations?
• What is a disadvantage of large cross-sectional dimensions in ceramic connectors?
• Which method is favorable for maintaining the root-crown ratio during crown placement?
• What type of crown margin configuration should ideally be located supragingivally?
• What is a common indication for using partial veneer crowns?
• Which technique for margin displacement involves removing the inner epithelial lining?
• Which principle is NOT considered a biologic consideration during tooth preparation?
• What type of crowns can use incisal offset and lingual palate pinholes?
• Why is it essential to maintain proper contacts in an interim restoration?
• Which of the following is a critical consideration in the preparation of tooth grooves?
• Choosing between materials for post and core, which offers the highest durability?
• Which material cannot match with latex gloves?
• If the preparation margin location is supragingival for moisture control, what is the recommended method to use?
• During axial retention, the axis direction of the rotary instrument should be:
• When inlays rely on cusps bulk, what may this lead to?
• Why are partial-coverage restorations considered weaker?
• What aspect of a veneer preparation can influence the final appearance of the restoration?
• When preparing an outline form for a Class II inlay, where should the occlusal contacts be?
• Where should the margin be ideally located for an MOD restoration?
• How can internal stresses in a canal be reduced?
• Which factor can lead to the fracture of all-ceramic restorations?
• What is a potential consequence of excessive reduction during tooth preparation?
• What is the primary use of ultrasonic scaler vibration in dentistry?
• When is a subgingival margin not indicated?
• What mechanism does local anesthesia use to assist with saliva control during the impression process?
• What is a key characteristic of all elastomeric impression materials?
• What is a common cause of a compromised appearance in metal-ceramic restorations?
• Which type of dental restoration is least conservative in terms of tooth structure preservation?
• What should the diameter of a post be in relation to the root diameter?
• A cantilever restoration consists of how many pontics?
• In which type of tooth are shade problems most frequently encountered when making a metal-ceramic crown?
• Which type of silicone has unusually low polymerization shrinkage compared to most room-temperature cured polymer systems?
• What characteristic of the dental cement influences the stress during post insertion?
• What factor can lead to deformation of dental restoration during function?
• Which type of esthetic restoration is characterized by its partial coverage of a tooth?
• Which restoration is known for having high aesthetic results?
• Which type of contact, when missing, can cause migration of a tooth?
• Which crown type is known for being more aesthetic compared to others?
• What is one of the most common errors in dental preparation?
• Which factor is involved in the longevity of restoration after endodontic treatment?
• Which type of forces are most emphasized in occlusal function for anterior restorations?
• What characteristic describes a shoulder margin?
• What is the effect of insufficient porcelain thickness on metal-ceramic restorations?
• For good esthetics, an incisal reduction of how much is recommended for a metal-ceramic restoration?
• What are performed external surface forms in dentistry?
• For partial-coverage preparation, essential additional strengthening for the casting is provided by what?
• What type of bur is typically used for proximal and lingual axial reduction in partial coverage restorations?
• What is the main advantage of using polysulfide polymer in impression making?
• In prosthetic dentistry, which of the following is least likely considered when preparing a tooth for a restoration?
• What is a primary disadvantage of metal-ceramic restorations?
• What aspect is crucial during the restoration process to minimize deformation?
• Why is all ceramic restoration considered less conservative than PFM?
• Which forces tend to displace the restoration by causing rotation around the gingival margin?
• In restorative procedures, what is the role of diagnostic tooth preparation?
• Which method is effective in preventing pulp injuries during preparation?
• In what scenario are complete ceramic crowns indicated?
• Which angle is associated with a short bevel margin when preparing for a shoulder-bevel margin?
• What is the typical occlusal reduction width for a mesio-occlusal-distal (MOD) restoration?